York Mills Furnace Repair - 24 Hour Residential Heating
Best furnace repair & maintenance contractor in York Mills, Ontario and Etobicoke. Accredited, insured & bonded. 100% Satisfaction assurance. We don’t leave your home until you have a grin on your face!
Our service consists of an extensive furnace examination, a clear explanation of the issue and any necessary repair work, and a fair and precise estimate of the cost of the repair work. In addition, all our service technicians are accredited, insured and experienced in fixing all brands and designs of heaters.
Highlights of Our Services:
- Free assessments for new and replacement heaters
- One Stop Solution for domestic heating
- Fully accredited, insured, and bonded
- Live operators readily available to assist you 24 hours a day
- Full 1 year warranty on our labour and all the equipment we install
- Affordable financing options
- All jobs priced in advance — no surprise costs
- Expert furnace technicians who can answer your heating concerns
- Full variety of parts and innovative tools on all our service vehicles
- The heating aid you need is friendly and constantly quick
24 Hour Service
Emergency Furnace Repair
In York Mills, you can’t afford to be without your gas furnace in the winter season. Our certified professionals can fix any make or brand — and we’ll have you relaxing and warm again in no time.
Our professionals bring industry-leading training and real-world experience to every residential heating task. They are competent in fixing all kinds of heating equipment. We fully equip our vehicles with the parts needed to complete lots of regular repair work, assisting to get your home furnace up and running quickly.
We are offered 24/7 to assist in the occasion of an emergency situation. We devote to working with you to resolve any problem as quickly as possible.
If you experience any of the following, call us instantly at 1 (647) 691-2238:
Your furnace is blowing cold air or is not turning on at all.
It can be damaging to your health and even deadly if your furnace produces unhealthy levels of carbon monoxide (CO). You must immediately turn off your furnace and call an emergency situation furnace repair work service if you believe your furnace is producing dangerous levels of CO.
A gas leak from a heating system can be dangerous, and you must resolve it immediately. A typical sign of a gas leak is the odour of rotten eggs or sulphur. If you notice this odour near your furnace, it might indicate a gas leak.
Loud or unusual sounds might indicate a significant problem.
In these circumstances, it is essential to call an emergency furnace repair service as quickly as possible to bring back heat and guarantee the safety of your home and your household.
Furnace Maintenance
Heater upkeep is important due to the fact it can assist your furnace to run safely and efficiently. Routine maintenance can assist to determine and fix minor problems before ending up being more extensive and costly. It can also assist to extend the life-span of your furnace, saving you cash on replacement costs down the road.
Some specific benefits of furnace upkeep include the following:
- Enhanced safety: A heating system that is not maintained correctly can be a safety risk, as it may produce carbon monoxide or malfunction in a way that might trigger a fire. Having your furnace checked and tuned up frequently can help in reducing the threat of these mishaps.
- Improved performance: A heating system that is not correctly tuned up may not run as efficiently as it could, leading to increased energy expenses. Regular tune-ups make sure that your heater operates at pinnacle performance.
- Better efficiency: A well-kept furnace is more most likely to perform dependably and effectively. Keep your furnace in great working order so that it offers consistent, comfy warmth throughout the winter season.
What’s Associated with a Typical Furnace Tuneup?
A routine maintenance inspection from a heating professional starts with a detailed system examination. The professional will examine your system’s electrical connections, motors, blowers, and filters. This examination captures potential problems as quickly as possible and keeps your operating costs down.
Cleaning is also part of a scheduled furnace check-up. Removing dust and particles from your furnace’s interior elements (particularly the heat exchanger and burner chamber) keeps your equipment operating correctly and decreases a fire danger. The professional will also look for leakages to guarantee your system isn’t losing energy that drive up your expenses.
The final part of an annual check-up is a test run. Your professional will test your system carefully to verify that it’s operating at peak performance.
New Furnace Installation or Replacement
Generally, a residential furnace will last around 15 to twenty years. If your system is reaching this age, it’s time to begin preparation (and saving!) for a replacement, even if it’s not having any problems.
If your furnace requires regular repair work, no matter what age, replacement is a sensible alternative. Furnace repair work can become rather pricey if you need them repeatedly, and they often stem from underlying damage that will require more costly repair work in the future.
It could make monetary sense to change an old furnace, even if it remains in great operating condition. A more contemporary, energy-efficient system may justify its cost with lower heating expenses.
If your furnace maintenance practices have been consistent however your energy expenses are increasing, this may be a sign that your furnace is getting old and needing to work harder to keep your home comfy.
There are a number of benefits to replacing your old furnace:
- Increased energy performance: New furnace models are more energy effective, which lowers your energy expenses.
- Enhanced efficiency: Manufacturers design heaters to run more efficiently, which can assist to enhance your heater’s overall efficiency.
- Boosted safety: New furnace designs often feature sophisticated safety features, such as carbon monoxide detectors and flame sensors, which can assist to prevent mishaps and safeguard your household.
- Longer life-span: New heaters are generally more dependable and have longer life expectancies than older designs, which can save you cash on repair work and replacements in the long run.
- Improved comfort: New heaters offer a more consistent and comfy level of heat throughout your home, assisting to enhance your overall indoor comfort.
York Mills's Most Typical Furnace Problems
Make certain to call a furnace expert before your furnace cuts out totally! You ought to call us at the first sign of trouble; this is the most cost-effective method to take care of your furnace in the long run.
Watch out for these typical furnace issues and call us at 1 (647) 691-2238 whenever your furnace requires attention:
Frequent Stopping & Starting
An unclean heat sensing unit might trigger this behaviour. Or, it might be a sign that your fan motor is close to breaking.
Standing Water
If you see water puddles near your furnace, its condensate line may leak or be blocked.
Condensation
If water condenses on your walls, ceilings, or the inside of your windows, your heater may not deliver adequate air flow.
Non-Working Thermostat
When your thermostat isn’t working correctly, you could have a defective thermostat, or your heating system may have fan problems. A faulty thermostat may make it more complicated or pricey to heat your home conveniently.
Rats & Mice
Rats aren’t welcome in your house for lots of factors. Among them is that they can badly damage your heater, nest in the vents and chew on wires. Get your system checked by a HVAC expert if you discover a rodent infestation.
Cold Areas
When areas of your home are regularly cold, it’s a sign that your furnace isn’t delivering enough air. Insufficient air suggests long-lasting wear and tear, acute damage, or blockages in your vents.
Heating Unit Failing
A non-working furnace indicates that you ought to examine your thermostat settings and verify that your furnace is getting power. Further, examine the pilot light to see if it’s on.
Inadequate Warmth
Insufficient heat often happens with undersized heaters or if your filter is blocked.
Non-Stop Blower
If your blower never shuts down, the culprit may be a damaged limit switch. While a continuous blower is a quick fix, it does require an expert specialist.
Carbon Monoxide
An incorrectly installed or poorly-ventilated heater can fill your home with carbon monoxide, which can be deadly. Lower levels of carbon monoxide can trigger headaches, lightheadedness, nausea, and hallucinations.
Strange Noises
When your furnace starts making sounds you have not heard before, there’s most likely a mechanical problem. Get a heating professional to check your system as quickly as possible.
Steep Number of Emergency Repairs Calls
It may be time to think about a replacement if your heating system has needed expert repair work several times in the past two years.
Old Age
Even if your furnace is working fine, think about replacing it if it’s more than twenty years old. Modern units are a lot more energy effective, which can considerably reduce your heating costs.
What Can Be Done To Lower Furnace Costs?
Keep Temperatures As Low As Possible
Decreasing your thermostat setting by simply 1 degree can cut your month-to-month expenses by as much as two percent.
Change Furnace Filters Routinely
Potentially causing damage, an old, clogged up filter will make your furnace run inefficiently and utilize more energy. Change your filter every three months to keep your system running smoothly.
Include A Humidifier
Heaters warm the air in your house but also dry it out. Adding a humidifier to your heater will enhance air quality and lower your heating expenses.
Buy A Programmable Thermostat
With a programmable thermostat, you can set it so your furnace only works hard when needed, which is affordable and hassle-free!
Your One-Stop Service For Heating & Furnace Troubles In York Mills
Whatever your problems with your furnace, we’re all set to assist at any time. Call us day or night at 1 (647) 691-2238 and arrange a convenient time for a heating system examination or repairs.
All our professionals are trained and licensed by the manufacturers of the equipment they install. We utilize the best equipment and materials, ensuring you get the most affordable and dependable heater possible.
Frequently Asked Furnace Questions
Most frequent questions and answers
Typically, a residential furnace will last between 15 and 20 years. If your unit is reaching this age, it’s time to start planning (and saving!) for a replacement, even if it’s not having any problems.
If your furnace needs frequent repairs, regardless of age, replacement is a wise option. HVAC repairs can become quite expensive if you need them repeatedly, and they often stem from underlying damage that will require more costly repairs in the future.
It makes financial sense to replace an old furnace, even if it’s in good operating condition. A more modern, energy-efficient unit may justify its cost with lower heating bills.
Conversely, if your heating habits have been consistent but your energy bills are rising, this may be a sign that your furnace is wearing out and having to work harder than it used to.
As you might expect, the total cost of a furnace installation depends on many factors, including the size and brand of the new unit. Most of the installations we perform in Pickering cost $2,500 to $4,000. But we have completed installations that fall outside this range — both cheaper and more expensive.
Our technicians have the knowledge and patience to work with you and guide you toward the heating solution that best fits your needs and finances. We make the planning process simple. That’s why we offer upfront pricing, so you never have to worry about hidden costs. We also provide a comprehensive one-year warranty on equipment, parts, and labour.
With proper maintenance, a residential furnace should last 15 to 20 years. When you select a new heating system, get the best durability and efficiency by picking a furnace with a good energy star rating. Energy-efficient heating systems cost significantly less to operate.
It would be best if you also committed to regular maintenance and inspections to keep your furnace in tip-top shape.
A routine maintenance visit from one of our technicians starts with a comprehensive system inspection. The technician will check your system’s electrical connections, filters, blowers, and motors. This inspection catches potential problems as soon as possible and keeps your operating costs down.
Cleaning is also often part of a scheduled furnace check-up. Removing dust and debris from your furnace’s interior components (particularly the heat exchanger and burner chamber) keeps your equipment operating correctly and minimizes fire risk.
Finally, a furnace check-up will also include a check for leaks to ensure your system isn’t wasting energy and driving up your bills.
The final part of an annual check-up is a test run. Your technician will monitor your system carefully to confirm it is in working order.
For a lower wintertime heating bill, try these simple tips:
Keep Temperatures As Low As Comfortable
Reducing your thermostat setting by just 1 degree can cut your monthly bill by as much as two percent.
Change Furnace Filters Regularly
Besides potentially causing damage, an old, clogged filter will make your furnace run harder and use more energy. Change your filter every three months to keep your system running smoothly.
Add A Humidifier
Furnaces heat the air in your home but also dry it out. Adding a furnace humidifier to your heating system will improve air quality and lower your heating bill.
Invest In A Programmable Thermostat
With a programmable thermostat, you can schedule your thermostat settings, so your furnace only works hard when required, which is convenient and economical!
Your One-Stop Solution For Furnace Issues In Pickering
Whatever your problems or concerns with your furnace, we’re ready to help at any time. Call us day or night at (289) 512-5025 and schedule a convenient time for a furnace inspection or a repair job.
All our technicians are fully trained and authorized by the manufacturers of the equipment they install. We use only the best equipment and materials, ensuring you get the most reliable and affordable heating system possible.